Q-See QC40108 user manual Control, Setting PRESET/PATROL/PATTERN/SCAN, Preset, Patrol, Pattern

CONTROL

Selecting the Pan/Tilt/Zoom shortcut will open the Pan/Tilt/Zoom controls window

Speed – From 1 to 8

and adjust zoom, focus and iris

PICTURE 6-5

Using the mouse, you can control the direction of the camera’s movements by clicking on the arrows.

PICTURE 6-6

Intelligent Positioning Key - If your protocol supports it, clicking and dragging in the blue button in the center will allow you to move the camera faster – between 4 to 16x speed.

SETTING PRESET/PATROL/PATTERN/SCAN

Clicking the Set button in the PTZ Control Panel (Picture 6-5) opens a new window in addition to leaving the PTZ Control Panel active.

This window allows you to set up the PTZ’s

Preset, Tour, Pattern and Border functions.

PICTURE 6-7

Preset

STEP 1. Start by using the eight direction arrows on the PTZ Control Panel (Picture 6-5) to position the camera where you want.

STEP 2. Click the Preset button in the Function list and enter the number you want to assign to this preset.

This preset can now be added to a tour.

Patrol

STEP 1. Click the Patrol button in the Function list and enter the number of the preset you wish to add to it.

STEP 2. Click Add Preset to enter it into the tour. You can have up to 80 presets in a single patrol.

STEP 3. Assign the patrol a number

PICTURE 6-8

Pattern

STEP 1. Click the Pattern button in the Function list.

STEP 2. Click the Begin button

STEP 3. Modify the zoom focus and iris settings using the PTZ Control Panel (Picture 6-5)

STEP 4. Click the End button to save the changes

STEP 5. Enter the desired number for this pattern into the field.

PICTURE 6-9

Border (Auto Scan)

STEP 1. Click the Border button in the Function list

STEP 2. Select either the Left or Right button to indicate which edge you are defining

STEP 3. Use the direction arrows in the PTZ Control Panel (Picture 6-5) to move the camera to the limit desired.

STEP 4. Repeat for the other border.

PICTURE 6-10

In the PTZ Control Panel (Picture 6-5), clicking the PTZ Trace button will begin the auto scan. The button will convert to a Stop button which can be used to end the scan.

CHAPTER 6 PAN/TILT/ZOOM CAMERAS

52 53