QH32DVR4C User’s Manual

5.5 Camera name and OSD (On Screen Display) Setup

Camera Name

In “Camera” menu, you can input a name for each camera. See fig 5.9 Please note that a camera’s name can not be copied.

Fig 5.9 Input camera number

The steps to setup camera name:

Step 1: Select a camera.

Step 2: Move “Active Frame” to camera name edit box, press EDIT key to enter

into edit status, you can input digital number, uppercase and lowercase characters (refer to Chapter 3.4). The camera name can support 32 characters.

Step 3: Press ENTER

key to exit edit status.

 

 

 

Move “Active Frame” to “Confirm” button, press

ENTER

to save the change

 

 

 

and you can see the new camera name. Press “Cancel” button or ESC key to abort.

Camera Name Position

 

 

 

 

 

 

If you do not want to display a camera name, just disable the check box beside

camera name editbox. The

disable flag is “ ”. If you enable the check box, you can

 

40 ×

 

 

 

setup the camera name position. You can copy the position to any other camera. The setup steps are:

Page 40
Image 40
Q-See QH32DVR4C user manual To save the change, Camera Name Position