Hard Drive HDD Installation | Q-See QH32DVR4C specification

QH32DVR4C User’s Manual

Chapter 2: Installation

Warning: Before you install the DVR, please make sure the power to the DVR is switched off.

2.1 Checking the DVR and Its Accessories

When you get the product, check that all the items are included in your product package. The Package should include:

1-QSC26404 DVR	1-5 way power supply for cameras & DVR
2-QOCDC60 cameras	4-60 foot cables for cameras
2-QOCDC36 cameras	5-Female RCA to Male BNC connectors
1-Installation CD	1-320GB Hard Drive (installed in DVR)
1-Product Manual	1-Remote Control (with 2 AA Batteries)
1-USB Mouse	1-RJ45 Ethernet Cable
1-USB 2.0 Cable

2.2 Hard Drive (HDD) Installation

Installation Notice

Note: The QH32DVR4C Bundle comes with a 320GB Hard Drive already installed so you will only need to follow these instructions if you want or need to install a new hard drive in the DVR.

Installation Tools

One Phillips screw driver.

HDD Installation

1.Remove the DVR box lid.

2.Place the HDD on the mounting plate.

3.Connect the ATA data cable correctly. The cable has three connectors for DVR main board, master HDD and slave HDD.

4.Plug in the HDD power connector.

5.Replace and reattach the DVR box lid.

Note: After the HDD is installed, it must be formatted. Please refer to Chapter 6.4.

7

Image 7

Q-See QH32DVR4C user manual Checking the DVR and Its Accessories, Hard Drive HDD Installation

Contents

QH32DVR4C QH32DVR4C User’s Manual QH32DVR4C User’s Manual Website Customer Service Storage Functions Product Introduction Network Functions Preview & Playback FunctionsOthers Installation Notice Installation Tools InstallationChecking the DVR and Its Accessories Hard Drive HDD Installation Rear Panel Description System SetupQSC26404 Rear Panel Index Type Name Description Operational InstructionsFront Panel Front Panel Form 3-1 Items on Front Panel 【】【】 Index Name Description IR Remote Control Powering Down the DVR Loading the Batteries Into the Remote Control【】Starting the Remote Control Disabling the Remote Control Form 3-3 List of Menu Options Menu Description Menu Options Menu Operation How to Enter Into Menu ModeMain Menu Description Edit status, you can input text in the box Key to select number, upper case, lower case or symbolsYou can use To select one Key to enter into Key to exit menu and return to preview mode How to Exit MenuInput Text Key to display or hide the camera status bar Basic Operation Guide Power OnLight is off, please do the following Light is green. On the monitor or VGA display Icon Icon Color Status Description Recording status Form 4-1 Camera record status Key to switch to multi-screen view Alarm status Input password User Name and PasswordLogin Change Password Keys. As .6 shows Change users’ password PTZ Control Interface PTZ Pan, Tilt, Zoom Control Press Key to select the PTZ camera on channel Adjust Preset DescriptionSelect Channel PTZ Control Keys Description Manual【】Record【】 Start/Stop Auto in PTZ Control Mode【Exit PTZ Control】 Mode Press ESC or Enter to exit and return to preview mode Description Playback List box. You can use To select recorded file type. The file type options are10 Playback interface Copy segment Edit Stop copy Open/Close soundTo pause/continue playback. If played frame by Frame, Press Control Bar Functions Playback With Mouse Attached Playback interface, you can backup the recorded files Backup Recorded FilesBar stays at the file you want to backup, press Edit Again to stop selecting. This segment is selected 12 Playback list Please refer to Chapter Shutting Down the DVR Password Modification Parameters Setup GuideAdministrator and Password Enter into administrator menu User management Add User Add and Delete UsersEnter into User Management interface Steps are as follows Add new user name Setup the password for new user Save the new user’s password and rights Setup the rights for new user MAC Address Press Cancel or ESC to abort deleting. As shown in figUser rights description Local Remote through network or internet Key to abort modification Effective. Press Cancel button or ESCUnit Name and Device ID Confirm button and press Device ID Video Output Standard and VGA SetupPress Confirm button to save or Cancel to abort VGA setup Camera Name To save the changeCamera Name Position Then use Key to select OSD format. Here are the OSD formats Display menu, you can setup DVR system date and timeMove your active frame to Date/Time setup and press enter Return to Camera menu, and press Confirm button to save it. Date OSD Position Video Parameters Setup Satisfied with the real time video image, press Enter Select camera Please useTo abort modification 22*18 panels 22*15 for NTSC, you can use Keys to move Mask Area Setup Here is an example of the mask area function shown as fig Disabling the mask check box cancels the mask area Enter into Camera menu Select camera Please use View Tampering AlarmSelect sensitivity Enter into Camera menu Video Loss Alarm After your setup, press Confirm button Save alarm setup Enter into Camera menu Select camera Use Motion Detection Clear all motion areas Press Clear motion area 】【 Preview Properties QH32DVR4C User’s Manual Recording menu description Recording Setup Select a day and enable all day recording option All day recording setup Enter into recording schedule menuBit Rate Type Copy to other days Select one day and disable all day recording optionSetup time period and record type Record type Enter into Alarm in Handling sub menu External Alarm Input and Relay OutputExternal alarm input setup Alarm type Save setup Alarm trigger record channel setupSchedule for alarm handle method Alarm handle method PTZ Linkage Setup alarm out schedule Alarm relay output setup Alarms menu, useSelect delay time Enter into alarm out schedule Exceptions Network menu description Network Parameters Advanced setup description PPPoE DVR supports PPPoE dail-up function Accessing the DVR over a network Accessing the DVR from a remote computer PTZ menu description PTZ Pan, Tilt, Zoom Preset setup Iris FOCUS+ FOCUS- ZOOM+ Sequence setup Cruise setup Utilities Restore Parameters Upgrade Hard Disk Management Stop Alarm OutReboot Power Off View Log By Time For example The steps of viewing alarm logBy Type&Date System Information FTP Server Setup Firmware Upgrade Setup username Upgrade Mode Moving Drag the left keySingle click the left key Right click Scroll wheel forward Click the right key = d i ⎟ 8 ⋅ 3600 ⎟1024 Appendix B HDD Capacity Calculation Material and tool Appendix C DVR Connect Cable DefinitionRJ45 introduction Pin definition QH32DVR4C User’s Manual Appendix D DVR Specifications Models QOCDC60 QOCDC36 Appendix D Camera Specifications Failure Possible reasons Appendix E Troubleshooting Appendix F Product Service & Warranty Appendix G Customer Information Card Website Customer Service