Q-See QH32DVR4C Add and Delete Users, Enter into User Management interface, Steps are as follows

QH32DVR4C User’s Manual

In the user name list box, by default only “admin” exists. You can use

key, to move “Active Frame” to password edit box, and press EDIT key to enter【→into】

【	】
edit status. Press numeric keys to input a new password. The password is made up of
16 numbers at most. After you finish inputting password, press	ENTER key to exit.
【		】
Move “Active Frame” to “Verify password” edit box, input the new password. Move

“Active Frame” to “Confirm” button, and press ENTER , if password and verified

password are the same, the password will be saved【 and take】effect.

If password and verified password are not same, a warning message box will appear, as shown in fig 5.3

		Fig 5.3 Error
In this case, press ENTER		to return to password edit box, and input the new
password again.	【	】

5.2 Add and Delete Users

Enter into “User Management” interface.

Add User

The steps are as follows:

Step 1: Enter into “User Management” menu shown in fig 5.4

Please refer to Chapter 5.1

34