Q-See QH32DVR4C user manual PPPoE DVR supports PPPoE dail-up function

QH32DVR4C User’s Manual

PPPoE: DVR supports PPPoE dail-up function.

Example: To use PPPoE function

Step 1: Enter into “Network” menu.

Step 2: Select NIC type.

Step 3: Input port number. In the port edit box, use numeric keys to input port number. The port number must be more than 2000.

Step 4: Input IP Server: Input one fixed Internet IP address where the IP analyst software

(IPServer) is run.

Step 5: Input PPPoE parameters. Use ENTER or EDIT key to enable PPPoE function

(set PPPoE flag as “ ”). Input PPPoE username,【 password】 【and verify】 password that ISP provided.

Step 6: Save parameters√ . In the “Network” menu, press “Confirm” to save parameters. Reboot the DVR to make parameters effective. In the reboot process, the DVR will start dialup using PPPoE function. If the DVR dials into the internet successfully, the DVR will display the dynamic internet IP address in the “Network” menu.

DDNS: This function is not available in this model.

Email: This function is not available in this model

64