Q-See QH32DVR4C External Alarm Input and Relay Output, External alarm input setup, Alarm type

QH32DVR4C User’s Manual

5.13 External Alarm Input and Relay Output

For QSC26404 there are 4 alarm in and 1 relay out ports. In “Alarms” menu, you can setup each external alarm input.

In main menu, move the “Active Frame” to “Alarms” icon and press ENTER key to enter

into alarms menu as shown in fig 5.22 【 】

5.22 Alarms setup

External alarm input setup:

Step 1: Select one alarm input Usekeys to select one alarm input.

Step 2: Alarm type	【↑】【↓】
This is the sensor type. You can select “Normal Open” or “Normal Close” according to the
sensor type.

Step 3: Enter into “Alarm in Handling” sub menu

In the “Alarms” menu, there are two options for “Alarm Handling”. One is “Ignore”, and the other is “Handle”. If you select the “Handle” option, you can activate “Policy” and “PTZ Linkage” buttons on the right side. Move the “Active Frame” to the “Policy” button and press

ENTER key, you will enter into “Alarm in Handling” sub menu as shown in fig 5.23

【 】 57