Q-See QS4474 user manual Video Play Settings, Audio Settings

STEP 5. When you select Play, a Playback Control Bar will appear.

1 2 3 4

	5	6	7	8	9	10	11	12	13 14 15 16 17 18 19		20	21	22
						PICTURE 4-24
#	Function								#	Function
1	Hour Blocks								2	Minute
3	Progress Bar								4	Date
5	Play								6	Previous Recording File
7	Pause								8	Stop
9	Previous Frame / Next Frame								10	Slow Play, Normal Play, Fast Play
11	Next Hour								12	Snapshot
13	Reduce window								14	Play All Channels
15	Add window								16	Start
17	Cut								18	Delete
19	Convert AVI								20	On-Screen Display
21	Mute								22	Volume

Click the button on the bottom of the multimedia player and then click the Play button (Item number 5 in Picture 4-24) to start playing the file.

The Playback Control Bar shows the date the file was recorded. The Hour Blocks indicate (in 24 hour format) at what hour the event took place. The green area in the Progress Bar shows when in that hour the event occurred as well as how far the player is in the video recording.

The example displayed in Picture 4-24above, shows that the event being played was recorded on April 2, 2009 from 4:57pm (16:57) to 5pm. Clicking on the Next Hour button (Item number 11 in Picture 4-24) would take the user to the rest of the event beginning at 5:00.00.

Video Play Settings

Each video record contains data from all the cameras that were recording at that time. You can view up to four of those recordings at one time by clicking on the “Play All Channels” button (Item number 14 in Picture 4-24). Or, you can choose which channel will be played back in the Playback software by following these steps:

STEP 1. In the Setting menu in the
Playback software toolbar, select
Video Play Setting
STEP 2. From that pull-down menu,	PICTURE 4-25	CHAPTER
choose Normal Video Bar.		4
		BASIC
STEP 3. In the resulting pop-up window,		OPERATION
choose which channel you wish to
view.
STEP 4. Check the box next to “Play
the Video”. Click Apply then OK.
	PICTURE 4-26

Audio Settings

If you have connected an audio-capable camera or a microphone to Channels 1 or 2, you can play back recorded audio along with the video.

STEP 1. In the Setting menu in the

Playback software toolbar, select

Audio Channel Setting.

STEP 2. From that pull-down menu,	PICTURE 4-27
choose Normal Video Bar.
STEP 3. In the resulting pop-up window,
choose which channel you wish to
enable audio for.
STEP 4. Check the box next to “The
channel has sound data”. Click Apply
then OK.
	PICTURE 4-28

40 41