RECORDING | CHAPTER 5 |
The controls for scheduling recording are mostly found in the Record menu which is located in the Main Menu. Certain features, such as Motion Detection, are located in the Advanced menu (also reachable through the Main Menu) but are included here for ease of instruction.
5.1 RECORDING CONFIGURATION
In addition to scheduling the recording times for your cameras, you can also set resolution format, bitrate, recording block size, audio feed and recording mode among other parameters.
PICTURE
The menu will only display four channels at a time. If your system supports more channels, a
The recording options for each camera can be selected independently and are available below each camera’s channel number.
CHANNEL. Enable/disable recording for a specific camera by toggling it On or Off using the
RESOLUTION On the QS 206, CIF is the only resolution option. The QS408 offers the larger and clear D1 recording format on channels 1 and 2. Both the QS434 and 464 offer D1 on all channels
BITRATE Select BEST, FINE, or NORMAL. Set up the code rate for recording corresponding to 768Kbps, 512Kbps and 384Kbps.
AUDIO If you have a powered microphone or
REC. MODE Select POWER UP to record continuously from the time the DVR is turned on. If you select TIMER RECORD, you will need to set a recording schedule on the system.
REC. SIZE Record Size sets the file size for recorded video files on the system. Instead of recording data as one large file, the system will divide the data into blocks of 15, 30, 45, or 60 minutes. This makes the recorded data easier to search.
Click APPLY to save your settings. Click CLOSE in the confirmation window. Click EXIT in every menu until all windows are closed.
5.2 RECORDING SCHEDULE
The DVR is set by default to record on all channels when motion is detected (designated as “Alarm Recording.” You can program a customized schedule that best meets your individual needs.
The Schedule Grid shows the days of the week and hours 0~23. You can set Alarm Recording (Red), General (Normal) Recording (Green), or No Recording (Blue) to each time block of each day.
To set a recording schedule: | PICTURE |
| |
STEP 1. Open the Main Menu and click RECORD. |
|
STEP 2. Under REC. MODE, select TIMER RECORD. |
|
STEP 3. Click SCHEDULE. The Schedule menu opens. |
|
STEP 4. Under CHANNEL, select specific channels or select ALL.
STEP 5. Below the grid, click either ALARM (red), GENERAL (Green), or NO RECORD (Blue) and then click a time block on the desired day.
STEP 6. Use the FROM/TO
STEP 7. Click SAVE.
STEP 8. Click EXIT in each menu until all windows are closed.
Example
You want your system to record continuously on all channels from 9 AM to 5 PM Monday to Friday. You also want Alarm/Motion recording from 5 PM to 9 AM. You do not want the system to record Saturday or Sunday.
STEP 1. Open the Schedule menu. |
|
STEP 2. Under CHANNEL, select |
|
ALL. |
|
STEP 3. Click the blue NO RECORD |
|
block below the grid. A checkmark |
|
will appear in the block. |
|
STEP 4. Under SUN, click blocks |
|
00~23. The blocks will turn blue. | PICTURE |
STEP 5. Under FROM, select SUN. Under TO select SAT, and then click COPY. Step 6. Click the red ALARM block below the grid.
STEP 7. Under MON, click blocks 00~08 and blocks 18~23. The blocks will turn red.
STEP 8. Under FROM, select MON. Under TO select TUE, and then click COPY. Repeat for Wednesday, Thursday, and Friday.
Your completed schedule should the same as the schedule in Picture
CHAPTER 5 RECORDING
42 | 43 |
