Q-See QSDT8PCRC manual Address Communication address of P.T.Z device ID number, Serial Ports Setup

Error! Use the Home tab to apply
	1 to the text that you want to
appear here. Error! Use the Home
tab to apply		1 to the text that
you want to appear here.			SuperDVR & QSDT8PCRC
标题		标题	User Manual
	DSCP, DH-SD, Lilian, Minking, Neon, PelcoD, PelcoP, Star, VIDO, VISCA
	3.	Address
	Communication address of P.T.Z device (ID number)
		5.7.2 Serial Ports Setup
	Users should first enable the P.T.Z control function of a certain camera and
	select a port number in P.T.Z Protocol Setup (refer to Figure5-18), and then

set corresponding parameters in the area below:

Figure5-19 P.T.Z Serial Port Setup

1.Port

Users can set port number.

2.Baud Rate

Set P.T.Z device Baud Rate to match setting on camera, default value is 9600.

3.Data Bits Default value is 8.

4.Parity

Odd and even parity bit, default None.

5.Stop Bits Default value is 1.

NOTICE: Users should look at the control board of the P.T.Z device and get the Baud Rate, Protocol, and Address first, then enter the same values into the SuperDVR program.

36