Chapter 6 Managing the File System
Performing Stripe Group Movement
StorNext User’s Guide 162
Figure 111 Stripe Group Move
Status Screen
2When the move status is Success, mark the source stripe group as
“down” and then restart the file system.
3If the status is Failed, click the link to determine the cause of failure.
If desired, retry the move.
Reusing a Stripe Group
After a Move 6If you want to remove LUNs and the associated stripe group following a
successful move, you must follow these steps:
1Mark the stripe group as “Down” as described in Modifying a Stripe
Group on page 112.
2From the command line interface, rename the downed stripe group.
(You cannot accomplish this step through the GUI.)