Chapter 10 Managing Storage Disks
Changing a Storage Disk State
StorNext User’s Guide 241
Figure 183 Change Storage
Disk State Screen
2Select the storage disk whose state you want to change.
3Select the state (Online or Offline) to assign to the selected storage
disk, and then click Apply.
4After the Status screen informs you that the storage disk’s status was
successfully changed, click Close. The Change Storage Disk State
screen shows the changed state for the storage disk you selected.
5If desired, repeat steps 2 - 4 to change the state for additional storage
disks.
Note: The “Online Pending” state applies only to deduplication-
enabled storage disks. This state means a verification
process is currently in progress. When verification is
complete, the status automatically changes to “Online.”
When a storage disk is in the Online Pending state, you
can retrieve from the storage disk but cannot make
modifications. Also, no store or delete operations are
performed on the storage disk.
When a storage disk is in an Online Pending state, you can
change the state only to Offline. If you change the state
from Online Pending to Online, the operation will fail.