Chapter 7 Managing Libraries
Auditing a Library
StorNext User’s Guide 179
• Delete ALL drives associated with the library as described in
Deleting a Tape Drive on page 190.
1From the SNSM home page, choose Library > Config Library from
the Admin menu. The Configure Library screen (figure124 on
page177) appears.
2 Select from the Select Library list the library you want to delete, and
then click Delete. A message window prompts you to confirm that
you want to delete the library.
3Click OK to proceed. The Delete Library Status screen appears.
4After the status screen indicates that the library has been deleted,
click Close.
Auditing a Library
Use this procedure to audit a library. An audit is a physical check of each
library component to verify its integrity and make sure the database and
library are synchronized. Quantum recommends that you audit the
library after each restore.
1From the SNSM home page, choose Library > Audit Library from the
Admin menu. The Audit Library screen appears.