Chapter 2 StorNext GUI Overview
The Configuration Wizard
StorNext User’s Guide 26
Figure 11 Config Menu Options
Each of the Configuration Wizard’s tasks are described in detail
elsewhere in this guide:
• Step 1: Enter License (See Entering the StorNext License on page 37)
• Step 2: Add File System (See Adding a File System on page 78)
• Step 3: Add Library (See Adding a Library on page 164)
• Step 4: Add Tape Drive (See Adding a Tape Drive on page 183)
• Step 5: Add Media (See Adding Media to a Configured Library on
page 201)
• Step 6: Add Storage Disks (See Adding a Storage Disk on page 23 4)
• Step 7: Add Storage Policy (See Adding Media to a Policy Class on
page 262)
• Step 8: Email Notification (See Setting Up E-mail Notification on
page 64)