Chapter 10 Managing Storage Disks
Deleting a Storage Disk
StorNext User’s Guide 239
•Mount Point: The file system mount point for the storage disk.
You can change the mount point only on a blank or unused file
system. To change the mount point, select an existing mount
point from the drop-down list, and then click Browse. The
directory changes in the Mount Point field. (You can modify this
parameter only for an unused storage disk.)
•Directory: The directory selected for file storage when the
storage disk was initially created. (You cannot modify this
setting.)
•# of Streams: The number of streams (1 - 8) I/O streams that can
concurrently write to the disk.
•Copy: The copy number (1-4) specified when the storage disk
was created. This copy number will be used by all policy classes.
(You can modify this parameter only for an unused storage disk.)
4After making storage disk modifications, click Apply.
5After the Status Screen informs you that your modifications were
made successfully, click Close
Deleting a Storage DiskUse the following procedure to delete a storage disk.
1From the SNSM home page, choose Storage Disk > Config from the
Admin menu. The Configure Storage Disk screen (figure 177 on
page234) appears.
2Select the storage disk you want to delete, and then click Delete.
A message will warn you that all data on the disk will be deleted with
the disk, and ask you to confirm that you want to continue.
Note: The Deduplication field indicates whether deduplication
is enabled for the storage disk. This field cannot be
modified.