Chapter 9 Managing Media
Adding Media to a Configured Library
StorNext User’s Guide 209
• Add multiple media labels by clicking the New Media button.
The Create New Media ID screen appears.
Figure 154 Create New Media
ID Screen
4On the Create New Media ID screen, perform the following steps:
1Enter the new media label name.
2Enter the number of media IDs you want to generate for the label.
3Enter a starting value for the new media ID.
4If you want to create additional media IDs, click Apply and
repeat steps 1 through 3.
5When you are finished creating media IDs, click OK to save your
changes and exit.
The Add Media IDs screen appears again.
5On the Add Media IDs screen, select one or more media IDs from the
list, and then click Next to continue. The Complete Add Media Task
screen (figure15 1 on page 206) appears.
6On the Complete Add Media Task screen, click Next to finish adding
the media, or Back to make changes.
7After the status screen informs you that the media has been
successfully added, click Finish.
Caution: StorNext will use and overwrite all available tapes, so
make sure only the library contains only media you want
StorNext to use.