Chapter 12 StorNext Reports
The Drive State Information Report
StorNext User’s Guide 267
The Drive State Information Report
The Drive State Information Report provides the following information:
•Drive ID: The drive ID (1, 2, 3, etc.)
•Drive Type: The type of drive being used (such as LTO)
•Device Pathname: The drive’s pathname
•Tape Compression: Indicates whether tape compression is
currently turned on or off
•Associated Library: The name of the library associated with the
drive
•State: Indicates whether the drive is currently online or offline
•Status: Indicates the drive’s current status, which is one of these
conditions:
•FREE: No medium is mounted
•IN USE: Medium is in use
•FAILED: Drive failed
•DELAYED: Drive is in a dismount-delayed state
•CLEANING: Cleaning medium is mounted
•USER MOUNT: Medium was mounted using the GUI’s
Media > Mount command or the CLI fsmount command
•OTHER: Medium was not mounted directly by the StorNext
Tertiary Manager, but by other means such as through the
Media Manager
•Dismount Delay: The time delay (in seconds) before media is
dismounted
•Assignment: Indicates whether the drive is currently free or
mounted
•Mount Count: The number of times the tape has been mounted
•Error Count: The number of errors (mostly write errors) a tape
has incurred