Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller ID

3.A menu appears with 7kje JWba selected. Press CONF/9 to select 9?:9M, then press SELECT/CH to change the setting. Ed or E\\ appears indicating the selected setting.

4.Press CID/HOLD and return the handset to the base to store the new setting.

STORING YOUR AREA CODE

You can store your local area code in the phone’s Caller ID record so it does not show the area code if the received call is from your local area. If for some reason you need to dial the area code (or store it in memory), you can add it afterwards. See “Adding/De- leting the Area Code” on Page 25.

Note: If your calling area requires 10-digit di- aling including area code, do not enter the area code but leave this option blank.

Follow these steps to store your area code.

1.Lift the handset and hold down CID/ HOLD until 9Wbb[h ?: I[jkf appears on the display with B_d[ ' selected.

2.Use ∗/TONE/6 or #/7 to select B_d[ ' or B_d[ (. Then press CONF/9.

3.A menu appears with 7kje JWba selected. Press CONF/9 twice to select 7h[W 9eZ[, then press SELECT/CH.

4.Enter your three-digit area code. If you make a mistake, repeatedly press ∗/ TONE/6 or #/7 to move the cursor over the incorrect digit, then enter the correct number.

Note: If an area code is already stored, it appears on the display. To delete the area code, press DEL/VOL three times,

then enter your area code. Or you can use ∗/TONE/6 or #/7 to move the cur- sor and edit the area code.

5.Press SELECT/CH to store the area code, then press CID/HOLD and return the handset to the base to store your new entry.

Installation 15