Radio Shack 2.4 GHz 2-Line Digital Spread Spectrum Cordless Phone with Call Waiting/Caller ID

LINE 2

USING THE PHONE WITH EXTENSION PHONES

The phone detects when an extension phone is in use. The corresponding line indicator flashes on the base and ?d Ki[ flashes on the handset’s display along with B_d[ ' or B_d[ (.

To join the conversation from the handset or base, press the line button for the line in use. While the busy tone is sounding, press the line button again.

Note: If you hang up the phone and some- one is still on that line on an extension, the phone’s line indicator(s) might not stay lit.

USING REDIAL

You can quickly dial any of the last three numbers dialed on the handset using either line 1 or line 2. Repeatedly press REDIAL/ PAUSE on the handset until the number de- sired appears, then press LINE 1 or LINE 2.

To dial the last number dialed on the base,

press LINE 1 or on the base then RE-

DIAL/PAUSE.

Notes:

•Each keypad has a separate redial memory. You cannot redial a number you dialed on one keypad using the redial key on the other.

•You can redial the number you originally dialed on Line 1 using Line 2, as long as you use the same keypad as previous.

•The redial memory holds up to 32 digits, so you can redial long distance as well as local numbers.

USING FLASH

FLASH performs the electronic equivalent of a switchhook operation for special services, such as Call Waiting.

For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. Press FLASH again to return to the first call.

Note: If you do not have any special servic- es, pressing FLASH might disconnect the current call.

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank-by- phone, require tone signals. If you have pulse service, you can still use these special tone services by following these steps.

Dial the service’s main number. When the service answers, press ∗/TONE/6. Any ad- ditional numbers you dial are sent as tone signals.

When you hang up, the phone automatically resets to pulse dialing.

USING THE PAGING/ INTERCOM FEATURES

You can use the phone as a two-way pager and intercom between the base and the handset. This is useful if the handset is away from the base and you want to locate it, or if you want to have a conversation between the handset and the base.

To page the handset from the base, press IN- TERCOM. The handset and base ring, and FW]_d] appears on the handset’s display. Press 8/INTCM on the handset to answer the page. ?dj[hYec appears.

To page the base from the handset, press 8/INTCM. The base and handset ring, and FW]_d] 8Wi[ appears on the handset’s dis- play. Press INTERCOM on the base to an- swer the page. ?dj[hYec appears on the handset’s display.

Basic Operation 19