Installation
! IMPORTANT !
Be sure the battery pack is
properly connected before
you try to charge it. The
CHARGE/IN USE or
CHARGE indicator illuminates when the handset is on the cradle, even if the battery pack is not connected.
Ô NOTES Ô
•If the phone does not work, recharge the battery pack. (The battery power might be too low for the display to operate.)
•If the battery pack becomes weak during a call, the handset beeps and Low Battery flashes. When this happens, you cannot make a call on the phone until you recharge the battery pack.
•If the battery pack is completely discharged or the base loses power while the handset is away from it, place both handsets on the main base to
3.Plug the battery pack’s connector into the socket in the compartment (the connector fits only one way). Place the battery pack in the compartment.
4.Replace the cover.
To charge the battery pack, place each handset on the base or charging cradle. The CHARGE/IN USE and CHARGE indicators on the cradles should light up. !
Recharge the battery pack when Low Battery flashes on the display.Ô
When you first use the phone after charging or recharging the battery pack, the phone might not work and you might hear error beeps. If this happens, place both handsets on the main base.
Using a damp cloth, clean the charging contacts on the handsets and cradles about once a month.
About once a month, fully discharge the battery packs by keeping the handsets off the cradles until Low Battery flashes on each handset display. Otherwise, the battery pack loses its ability to fully recharge.
10
