Caller ID
Ô NOTE Ô
If a message has already been stored in the selected memory number location, a confirmation screen is displayed.
Press VOL/
key to select Yes. Press CH/SEL to overwrite.
The display returns to the Caller ID list.
Select the phone number to be stored from the Caller ID list by pressing VOL/ 
or VOL/ 
keys.
2.Press MEM.
3.Press VOL/ 
or VOL/ 
keys or enter a number (0 - 9) to select the memory location to be stored.
4.Press CH/SEL. Ô
You hear a confirmation tone and the number is stored in memory. The display returns to the Caller ID list.
CHANGING THE DIGITAL SECURITY CODE
In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.
1.Remove the handset from the cradle. Press and hold PAGE on the base.
2.While holding PAGE, place the handset in the main base and leave the handset in the main base for more than three seconds.
3.Remove the handset from the main base. Then place the second handset in the main base and wait for more than three seconds. Do not hold PAGE this time.
4.Press the TALK/FLASH key on one handset. Once you make sure Talk appears on the display, press the END key. Then, try with the second handset. If each handset displays Talk, a new
32
