channel for clear operation. This function works only when the phone is in use. Press CH/SEL. Scanning appears on the display, indicating the phone is changing to another channel.
PAGE
To locate the handset (while it’s off the base), press PAGE on the base. The handsets beep for 60 seconds. Paging is canceled when you press PAGE on the base or any key on either handset. Ô
FLASH AND CALL WAITING
If you have “Call Waiting” service and a call waiting tone sounds while you are on a call, press TALK/FLASH to accept the waiting call. There is a short pause before you hear the new caller. To return to the original caller, press TALK/FLASH again.Ô
SETTING MENU OPTIONS
There are four setup options available. They are Auto Talk, CIDCW (Caller ID on Call Waiting), Area Code, and Dial.
Auto Talk allows you to answer the phone without pressing TALK/FLASH.
If the phone rings when Auto Talk is On, simply remove the handset from the cradle and the phone automatically answers the call. If the phone rings when Auto Talk is Off, you must press TALK/FLASH to answer the call. Ô
Changing the Auto Talk and
CIDCW
1.Press and hold CID/MENU.
2.Use VOL/ 
or VOL/ 
keys to move the pointer to the selection that you would
Ô NOTES Ô
Page
Paging is also canceled when the phone receives an incoming call.
Flash and Call Waiting You must subscribe
through your local telephone company to receive Call Waiting Service.
Setting Menu Options
•The Cordless phone features include Auto Talk and Auto Standby. Auto Standby allows you to hang up by simply returning the handset to the cradle.
•Auto Talk and Area Code settings can be also changed from handset 2.
Only two settings (Auto Talk and Area Code) appear on the display.
CIDCW On/Off setting can be changed from handset 1.
To confirm which handset is HS1, look at the display indicating HS1 or HS2 when the handset is on the cradle.
Operation
17
