Memory Dialing
Ô NOTES Ô
•To exit the memory function without dialing, press END. The handset returns to the standby mode.
•Whenever you are using a memory menu screen, you must press a key within 30 seconds or the phone will return to the standby mode.
•If you select a memory location that does not have a stored number, the phone will not dial.
3.Enter a number (0 - 9) to select the memory location of the desired phone number. The selected phone number is displayed and dialed. Ô
4.To hang up, press END.
CHAIN DIALING
The memory locations on the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits) that you need to enter once your call connects. This is referred to as Chain Dialing.
An example of this is a bank account number. Once you have called your bank, and are prompted to enter the account number, press MEM and enter the location number (0 - 9) where the special number has been stored.
Store your special number with an identifying name. (Refer to “Storing Phone Numbers and Names” on page 19.)
EDITING A STORED NAME AND/OR PHONE NUMBER
1.Press and hold MEM, Memory Store is displayed.
2.Press VOL/ 
or VOL/ 
keys, or enter a number (0 - 9) to select the memory location you would like to edit, and press CH/SEL. The screen appears with the memory location number that you have selected in the display.
3.Press VOL/ 
or VOL/ 
keys to select Edit Memory. Then press CH/SEL. Store Name is displayed. The cursor flashes indicating that the display is
24
