Problem

Solution

 

 

 

 

 

 

 

• Make sure the volume setting is not Ringer off.

 

 

 

• Keep the handset away from microwave ovens,

 

 

 

computers, remote control toys, wireless

 

 

Severe noise interference.

microphones, alarm systems, intercoms, room

 

 

monitors, fluorescent lights, and electrical

 

 

 

 

 

 

appliances.

 

 

 

• Move the base to another location or turn off the

 

 

 

source of interference.

 

 

 

 

 

 

 

• The handset was picked up before the second

 

 

The Caller ID does not

ring.

 

 

• The call was placed through a switchboard.

 

 

display.

 

 

• Call your local telephone company to verify your

 

 

 

 

 

 

Caller ID service is current.

 

 

 

• Make sure the battery pack is connected to the

 

 

 

 

Handset No.1 or No.2 not

handset and fully charged.

 

 

Re-register both handsets (See “Before Using,

 

 

working.

 

 

Register Extra Handset to the Main Base Unit”

 

 

 

 

 

 

on page 11.)

 

Troubleshooting

 

 

 

 

• Make sure the other handset is not already in

 

 

 

 

 

use. Both handsets cannot be in talk mode at

 

 

Unavailable message is

the same time.

 

 

Re-register both handsets (See “Before Using,

 

 

displayed on the LCD

 

 

Register Extra Handset to the Main Base Unit”

 

 

screen of the handset.

 

 

on page 11.)

 

 

 

 

 

 

• Make sure the handset is not too far from the

 

 

 

base when trying to use.

 

 

 

Re-register both handsets (See “Before Using,

 

 

The handset doesn’t

Register Extra Handset to the Main Base Unit”

 

 

communicate with the base

on page 11.)

 

 

or the other handset.

• Make sure that you registered the extra

 

 

 

handset.

 

 

 

 

 

 

 

• Only one handset at a time can talk with an

 

 

No 3-way conversation.

outside caller. To allow the other handset to talk

 

 

 

to the caller, transfer the call.

 

 

Low Battery message is

• Place the handset back in either cradle to

 

 

displayed on the LCD

 

 

recharge over night.

 

 

screen.

 

 

 

 

 

 

 

 

 

If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the problem, take the phone to your local RadioShack store for assistance.

35

Page 35
Image 35
Radio Shack 43-3595 important safety instructions Unavailable message is