Radio Shack 43-3595 important safety instructions CONNECTING/CHARGING the Battery Pack

DC IN 9V TEL LINE

1.Plug one end of the supplied short modular cord into the TEL LINE jack on the bottom of the base.

2.Plug the supplied AC adapter's barrel plug into the DC IN 9V jack.

3.Route the adapter

and modular cords through the grooves on the back of the base.

4. Plug the adapter into a standard AC outlet. And plug

the other end of the modular cord into a modular phone line jack.

5.For a wall plate, align the keyhole slots on the bottom of the base with the wall plate studs and slide the base downward to secure it.

For direct wall mounting, align the base's keyhole slots with the mounting screws and slide the base downward to secure it.

CONNECTING/CHARGING THE BATTERY PACK

The phone comes with a rechargeable nickel-cadmium battery pack in the handset, but not connected. Before using your phone, you must connect the battery pack. Then charge it for about 15–20 hours. !

1.Press down and slide the battery compartment cover off of the handset.

2.Lift the battery pack out of the compartment.

! IMPORTANT !

The EPA certified RBRC® Battery Recycling Seal on the nickel- cadmium (Ni-Cd) battery indicates RadioShack is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-THE-SHACK (1- 800-843-7422) for information on Ni-Cd battery recycling and disposal bans/restrictions in your area. RadioShack’s involvement in this program is part of the company’s commitment to preserving our environment and conserving our natural resources.

Installation

9