Memory Dialing
Ô NOTE Ô
In memory dialing operation, you must press a key within 30 seconds or the phone will return to the standby mode. If you return the handset to the cradle, the phone will return to the standby mode also.
telephone stores up to ten names/numbers in each handset. Ô
1.Press and hold MEM, Memory Store is displayed.
2.Press VOL/ 
or VOL/ 
keys, or enter a number (0 - 9) to select the memory location where you would like to store the number.
3.Press CH/SEL. A cursor flashes indicating that the display is ready for the name to be entered.
If Edit Memory appears, the selected memory location is already stored. Then you must either edit the entry in this location, delete the entry in this location, or select Go Back to choose another location.
4.To enter a name (up to 14 characters), use the number keys.
•See “Steps for Entering Names and Special Characters” on page 22.
•Use #/ 
and 
/ 
/TONE to move the cursor to the desired location.
•Use TRSF/DEL to delete characters as needed.
•Press and hold TRSF/DEL to delete all the characters.
•If a name is not required, go to step 5.
5.Press CH/SEL. Store Number is displayed.
20
