Radio Shack 7-in-1 Remote Control with Lighted Keypad Fm Page 14 Monday, July 19, 1999 1250 PM

15-1924.fm Page 14 Monday, July 19, 1999 12:50 PM

5.Hold down SET UP on the 7-in-1 until the red

light above turns on.

6.Press Plug ’n Power, then enter 0 – 1 – 4 on the 7-in-1. The red light turns off.

7.Press Plug ’n Power on the 7-in-1.

8.To turn on all light and appliance modules set to the same house code as the IR command console, press POWER (All Lts On) on the 7- in-1, or ALL LIGHTS ON on the IR command console.

To turn off all light and appliance modules set to the same house code as the IR command console, press MUTE (All Off) on the 7-in-1, or ALL UNITS OFF on the IR command con- sole.

9.To turn specific lights and appliances on or off using the 7-in-1 Remote Control, press the digit key (1, 2, 3, 4, 5, 6, 7, or 8) for the module you want to control. Then press On or Off (CHANNEL + (On) or CHANNEL – (Off)).

To control specific lights and appliances directly from the IR command console, set the console’s selector to the number of the module you want to control (1–4or 5–8), press the button on the console that corre- sponds to the number of the module you want to control (1/5, 2/6, 3/7, 4/8), then press ON on the IR command console.

10.To brighten or dim lights connected to lamp and appliance modules, press the digit key for the module you want to control. Then hold down VOLUME + (Brt) or VOLUME – (Dim) on the 7-in-1. Release the key when the desired level of brightness is reached.

Note: You must select the individual light to brighten or dim even if you used POWER (All Lts On) on the 7-in-1 to turn on all the lights at the same time.

Need help? Call 1-800-989-4706

14