Radio Shack 7-in-1 Remote Control with Lighted Keypad owner manual Setting a Plug ’n Power Timer

15-1924.fm Page 16 Monday, July 19, 1999 12:50 PM

9.To brighten or dim lights connected to lamp and appliance modules, press the digit key for the module you want to control. Then hold down VOLUME + (Brt) or VOLUME – (Dim) on the 7-in-1. Release the key when the desired level of brightness is reached.

Note: You must select the individual light to brighten or dim even if you used POWER (All Lts On) on the 7-in-1 to turn on all the lights at the same time.

Setting a Plug ’n Power Timer

You can set the 7-in-1 Remote Control to turn on or off a lamp/appliance module you select or turn off all modules after a period of 1 to 99 minutes. This works with an optional IR command console or Plug ’n Power Wireless Remote Control Sys- tem.

Note: When you use the 7-in-1 to control all mod- ules at one time, the only command that works is All Off.

1.Press Plug ’n Power on the 7-in-1.

2.Hold down TIMER on the 7-in-1 until the red

light above stays on.

Note: Skip Step 3 if you are turning all mod- ules off using the All Off command.

3.To turn on or off a specific module using the 7-in-1 Remote Control, press the digit keys to enter the module’s device code. The red light blinks once.

4.Press On (CHANNEL + (On) (to set a module to turn on), Off (CHANNEL – (Off) (to set a module to turn off), or MUTE (All Off) (to set all modules to turn off.

When the red light blinks once, the 7-in-1 has accepted the code.

Need help? Call 1-800-989-4706

16