Need help? Call
1-800-989-4706
11
OPERATION
1. Press the device key for the device you want
to control, then point the 7-in-1 at the device
and press POWER (All Lts On) (o r CHANNEL
+ (On) for some cable converters) to turn the
device on.
2. Repeat Step 1 for all other devices you want
to operate.
3. Point the 7-in-1 toward the device you want
to control, then press the appropriate device
key and the desired command keys.
Note: The command keys on the 7-in-1 work
the same as the keys on the original remote
control; however, the labeling might differ
slightly.
4. To turn off the last device you selected, press
POWER (All Lts On). To turn off other devices,
press the device key for the device you want
to turn off, the n press POWER (All Lts On).

PUNCH-THROUGH

The punch-through feature lets you alternately
control two different devices without pressing the
device keys for each one. Here’s how it works.
Not all of the 7-in-1 Remote Control’s keys are
used by every device. For example, a TV is often
the only device that uses the volume keys. After
you press TV, then press VCR, you can still use
the volume control to control the TV.
Punch-through does not work when you are using
the 7-in-1 to control CD players and Plug ’n Power
devices.
Notes:
• The punch-through feature might not work i f
the last two devices you selected have the
same (or similar) features. For example,
most TVs and some cable converters have
channel select keys on their remote controls.
15-1924.fm Page 11 Monday, July 19, 1999 12:50 PM