PUTTING A CALL ON HOLD
Press HOLD to put a call on hold so you can use the other phone line without dis- connecting the current call. The line indi- cator flashes when a call on that line is on hold.
Note: Do not return the handset to the base while a call is on hold. Placing the handset on the base after you press HOLD disconnects the call.
To release a line from hold and continue your conversation, press that line’s but- ton.
Note: If you do not pick up the call again within 3 minutes after putting it on hold, the phone disconnects the call.
You can alternate between the two lines by pressing HOLD then the button for the desired line.
Note: If you press the other line’s button without first pressing HOLD, the first call is disconnected.
CONFERENCE CALLING
Follow these steps to have a
1.Place the first call on hold.
2.Make or answer a call on the other line.
3.Press CONF. Both line indicators briefly flash then light steadily. All three parties are connected.
Note: During conference calls, some
To talk on only one line without discon- necting the other line, press HOLD to put both lines on hold. Then press the but- ton for the line you want to talk on.
To return to a
To end the conference call, press CONF or return the handset to the base.
To hang up one line and continue talking on the other, press the line button for the line you want to keep using.
15
