Radio Shack PRO-2045 owner manual Connecting AN Amplified Extension Speaker, Traffic Safety

Models: PRO-2045

1 44
Download 44 pages 57.28 Kb
Page 12
Image 12

Traffic Safety

Do not wear an earphone or head- phones while operating a motor vehi- cle. This can create a traffic hazard and can be illegal in some areas.

Even though some earphones and headphones let you hear some out- side sounds when listening at normal volume levels, they still can present a traffic hazard.

CONNECTING AN AMPLIFIED EXTENSION SPEAKER

In a noisy area, an amplified extension speaker might provide more comfort- able listening. Plug the speaker ca- ble’s 1/8-inch (3.5 mm) mini plug into

the scanner’s jack. This discon- nects the internal speaker.

Note: RadioShack stores sell an am- plified communications extension speaker.

INSTALLING AN

OPTIONAL CTCSS

TONE BOARD

The scanner’s CTCSS (Continuous Tone Control Squelch System) feature lets you choose to listen only to trans- missions that transmit one of 38 stan- dard CTCSS tones. To use CTCSS, you must install an optional CTCSS tone board (Cat. No. 20-0031).

Cautions:

Make sure the scanner is off and disconnect the power before you install a CTCSS tone board.

Discharge static electricity buildup by touching a metal object before you open the scanner.

1.Use a Phillips screwdriver to remove the two side screws on the scanner’s top cover and three screws on the bottom.

Caution: The scanner’s speaker is attached to the top cover and the circuit board. Use care when you remove the top cover to not damage the speaker or its con- nector.

12

Page 12
Image 12
Radio Shack PRO-2045 Connecting AN Amplified Extension Speaker, Installing AN Optional Ctcss Tone Board, Traffic Safety