Transferring a Frequency to Another Channel | Radio Shack PRO-2045

TRANSFERRING A FREQUENCY TO ANOTHER CHANNEL

Transferring to an Empty Channel

This feature lets you reassign a stored frequency to another bank’s vacant channel.

Note: You cannot transfer a frequency into or out of a priority channel.

1.Press MANUAL to stop scanning.

2.Using the number keys or the rotary tuner, select the channel that has the frequency you want to transfer.

3.Press TRANSFER. All bank indica- tors flash on the display.

4.Use the number keys to select the desired bank number. The fre- quency is automatically trans- ferred to the selected bank’s lowest empty channel.

Note: If all that bank’s channels are already used, FULL appears. In that case, you can select another bank.

Transferring to a Channel that has a Stored Frequency

1.Press MANUAL to stop scanning.

2.Press FREQ/CHAN-LOCK until

CHAN appears on the display.

3.Using the number keys or the rotary tuner, select the channel that has the frequency you want to transfer.

4.Press TRANSFER twice. CH flashes on the display.

5.Using the number keys or the rotary tuner, select the desired channel.

6.Press s to transfer the frequency.

Exchanging Frequencies

Between Two Programmed

Channels

1.Press MANUAL to stop scanning.

2.Press FREQ/CHAN-LOCK until

CHAN appears.

3.Using the number keys or the rotary tuner, select the channel that has the frequency you want to transfer.

4.Press TRANSFER twice. CH flashes on the display.

5.Using the number keys or the rotary tuner, select the desired channel.

6.Press t to exchange the frequen- cies.

29

Image 29

Radio Shack PRO-2045 owner manual Transferring a Frequency to Another Channel, Transferring to an Empty Channel

Contents

PRO-2045 Features Page Scanning Legally FCC Notice Contents Troubleshooting Care and Maintenance Specifications Using Standard AC Power Connecting PowerUsing Vehicle Battery Power Preparation Optional Outdoor Antenna Connecting AN AntennaTelescoping Antenna Using the Feet Resetting Scanner Testing Alert Reception Testing Alert Operation Listening Safely Connecting AN EarphoneTesting the Weather Alert Traffic Safety Connecting AN Amplified Extension SpeakerInstalling AN Optional Ctcss Tone Board Ctcss Board Look AT the Keyboard Understanding Your ScannerPage Look AT the Display FREQ, CHAN, Lock shows the rotary tuner’s current setting Channel-Storage Banks Understanding CHANNEL-STORAGE BanksMonitor Memories Storing Frequencies Using the Rotary ControlOperation Limit Search Searching for and Temporarily Storing Active Frequencies Direct Search Search Skip Automatically Storing Frequencies Moving a Frequency from a Monitor Memory to Channel Listening to Monitor MemoriesScanning Channels Turning Channel-Storage Banks On and Off Locking Out Channels Manually Selecting a Channel Weather Alert Using the Weather Alert Standby ModeScanning Weather Band Priority Special FeaturesDelay Changing Search Speeds Using Programmable Attenuator Turning on or OFF the KEY Tone Using Auto SortSkipping Data Signals Transferring to an Empty Channel Transferring a Frequency to Another ChannelTransferring to a Channel that has a Stored Frequency Exchanging Frequencies Between Two Programmed Channels Ctcss Tone Frequencies Using the Count FeatureUsing Ctcss Changing or Deleting a Ctcss Tone Frequency for a Channel Assigning a Ctcss Tone Frequency to a Channel General Guide to Scanning National Weather Service FrequenciesGuide to Frequencies Ham Radio Frequencies Birdie Frequencies Typical Band Usage Guide to the Action Bands Primary Usage Specified Intervals Bifc Band Allocation High Frequency HF 29 MHz-30 MHz AIR CSB Frequency Conversion Troubleshooting Care and Maintenance Specifications Dimensions /4 × 91/4 × 81/16 Inches HWD 82 × 235 × 205mm RadioShack