A LOOK AT THE DISPLAY
The display has several indicators that show the scanner’s current operating mode. A good look at the display will help you understand how your scanner operates.
MON — appears during a search or when you listen to a monitor memory. The number to the right of this shows the current monitor memory number. See “Listening to Monitor Memories” on Page 23.
FREQ, CHAN, LOCK — shows the rotary tuner’s current setting.
BANK — shows which channel- storage banks are turned on. See “Un- derstanding
HYPER — appears when you scan channels or when the scanner is in the Hypersearch mode during limit search, direct search, and auto store.
AUTO — appears when the scanner is in the auto store mode or when the auto sort function is turned on.
COUNT — appears when you use the scanner’s count feature.
CTCSS — appears when the CTCSS feature is turned on.
DATA — appears when you turn on the data skip feature.
FM/AM — shows the current modula- tion mode; flashes when you override the default mode.
P — appears when you listen to a pri- ority channel.
CH — digits that precede this indicator show which of the 200 channels the scanner is tuned to.
ATT — appears when the attenuator is turned on.
MHz — the large digits that precede this indicator show which frequency the scanner is tuned to.
SCAN — appears when you scan channels.
MAN — appears when you manually select a channel.
PGM — appears while you program frequencies into the scanner’s chan- nels.
PRI — appears when you set the scanner to scan the selected priority channels every 2 seconds.
16
