•Continue the search — press s or t.
•Hold the scanner on the fre- quency — press LIMIT or turn the rotary tuner either way one click.
Notes:
•You can press s or t during the hold to step through the fre- quencies toward the upper or lower limits.
•If you tune to a search skip fre- quency, the scanner displays L/O (see “Search Skip” on Page 21).
•During the direct search, you can change the modulation mode (NFM or AM). See “Changing the Modulation Mode” on Page 28.
Press LIMIT again or press and hold s or t for more than 1 second to resume the direct search.
Search Skip
You can skip specified frequencies during a limit or direct search. This lets you avoid frequencies that have data tones or are already stored in a chan- nel. You can program up to 50 fre- quencies for the scanner to skip.
Notes:
•If you program more than 50 skip frequencies, each new frequency replaces one you already stored.
•You can select the skipped fre- quency when the scanner is in the hold mode. The scanner displays L/O when you select a skipped frequency.
To skip a frequency, press S/S when the scanner stops on the frequency during a limit or direct search.
Follow these steps to see which skip frequencies you have stored.
1.During a limit or direct search, press REVIEW. The first skip fre- quency appears on the display.
2.Use s, t, or REVIEW to review the other skip frequencies.
To remove a skip frequency, select the skip frequency you want to clear by using s, t, or REVIEW, then press S/ S.
To clear all the skip frequencies at once, while searching for frequencies, press and hold S/S until the scanner beeps twice.
21
