AUTOMATICALLY STORING FREQUENCIES
You can have your scanner automati- cally store active frequencies into empty channels within the banks you specify.
1.Press PROGRAM then LIMIT. Lo and the lower limit frequency appears.
2.Enter the lower limit using the number keys or use the rotary tuner to enter the lower limit of the frequency range you want to search, then press E.
Note: If you enter an invalid fre- quency in Step 2 or 4, the scanner displays Error. Simply repeat the step.
3.Press LIMIT. Hi appears.
4.Enter the upper limit using the number keys or use the rotary tuner to enter the upper limit of the frequency range you want to search, then press E;.
5.Press AUTO. AUTO appears and the numbers
6.Using the number keys, enter the numbers of the banks where you want to store frequencies. The selected banks’ indicators appear steadily in the display. All other banks’ indicators flash.
Notes:
•To select bank 10, press 0.
•If you select a bank that does not contain an empty channel, the scanner beeps and FULL appears.
•To deselect the bank, press the bank number again.
7.Press s to search from the lower to the upper limit, or t to search from the upper to lower limit. The current bank’s indicator starts blinking. The current channel also appears.
When the scanner finds a trans- mission, it checks to see if the fre- quency is stored in any other channel. If not, the scanner stores the frequency, then continues searching for more transmissions.
8.To stop storing frequencies, press
MANUAL.
When all channels fill, the scanner beeps twice and End appears. Press MANUAL to display the channel where the last frequency was stored.
22
