Special Features

±"016'"±"

If the scanner did not receive a start or end

bit respect-ively from the PC, Ij7hj and ;dZ

do not appear.

then connect the other end of the cable to on top of the scanner.

3.Using the software supplied with the programming kit, configure the software to work with your scanner by clicking on Tools, selecting Configuration, then selecting

PRO-89.

4.While pressing ENT and 9, turn on the scanner. F=C and M_h;Zýappear. Then send the data from the PC. Ij7hj and the data being received by the

scanner appears in the order it is received. ±

5.When the scanner

successfully receives all data, ;dZ and <_d_I^ýappear. If the

scanner received an error while receiving data, ;dZ and Z#;hh appear. If the scanner

received a checksum error while receiving data, 9#;hh and a number shown next to 9#;hh

indicates the packet number where the error occurred. ±

40

Page 40
Image 40
Radio Shack PRO-82 manual PRO-89