Radio Shack PRO-82 manual 242#4#6+10, +Puvcnnkpi$Cvvgtkgu, Follow these steps to install batteries

24'2#4#6+10

You can power your scanner from any of three sources: ±

•internal non-rechargeable batteries or rechargeable batteries (not supplied – see “Installing Batteries”).

•standard AC power (with an optional AC adapter - see “Using AC Power” on Page 9).

•vehicle power (with an optional DC adapter – see “Using Vehicle Battery Power” on Page 10).

+PUVCNNKPI"$CVVGTKGU

Your scanner uses four AA batteries (not supplied) for power. You can use either the supplied non-rechargeable battery holder (black), or the supplied rechargeable battery holder (yellow) to install the batteries. Rý

If you install the rechargeable battery holder, you can operate the scanner and recharge the re- chargeable batteries at the same time. See “Charging Rechargeable Batteries” on Page 8.

For the best performance and longest life, we recommend RadioShack batteries. .

Follow these steps to install batteries.

1.Press in on the battery compartment cover on the back of the scanner and slide the cover down to remove it.

R"9#40+0)"R"

Never install non- rechargeable batteries in the rechargeable yellow battery holder. Non- rechargeable batteries can get hot or explode if you try to recharge them.

."%#76+10"."

•The battery holder fits only one way. Do not force it.

•Use only fresh batteries of the required size and recommended type.

•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

±"016'"±"

Connecting an AC or DC adapter to the scanner disconnects internal batteries when you use the supplied non- rechargeable battery holder, but it does not disconnect internal batteries when you use the supplied rechargeable battery holder.

Preparation

7