Lockout Function — lets you set your scanner to skip over specified channels or frequencies when scanning or searching.
Memory Backup — keeps the channel frequencies stored in memory for about an hour in the event of a power loss.
Wired Programming — you can connect your scanner to a personal computer and program frequencies into it using an optional cable and software. ±
Scan Delay — delays scanning for about 2 seconds before moving to another channel, so you can hear more replies that are transmitted on the same channel.
Duplicate Channel Alert — warns you when the frequency you are storing already exists in memory.
Manual Access — you can directly access any stored channel by entering that channel's number.
Key Lock — lets you lock the scanner's keys to prevent accidentally changing the scanner's programming.
Key Confirmation Tones — the scanner sounds a confirmation tone when you perform an operation correctly, and an error tone if you make an error.
Three Power Options — you can power the scanner from internal (rechargeable or non- rechargeable batteries) or external AC or DC power (using an optional AC or DC adapter).
±"016'"±"
You can get the cable, software, and additional information about using your personal computer to program your scanner from your local RadioShack store.
%106'065
(Continued) | |
Understanding |
|
Banks | 20 |
Channel Storage | |
Banks | 20 |
One Touch |
|
Banks | 20 |
Operation | 24 |
Turning On the |
|
Scanner/Setting |
|
Volume and |
|
Squelch | 24 |
Storing Known |
|
Frequencies Into | |
Channels | 24 |
Searching the |
|
One Touch |
|
Banks | 25 |
Using Tune | 27 |
Scanning the |
|
Stored |
|
Channels | 28 |
Turning Channel- | |
Storage Banks Off | |
and On | 29 |
Monitoring a |
|
Stored |
|
Channel | 29 |
Clearing a Stored | |
Channel | 30 |
Listening to the |
|
Marine Bank ... | 30 |
Listening to the |
|
Weather |
|
Band | 31 |
(Continued) |
|
Introduction
3
