Searching the One Touch Banks

channel and do not want to miss any details – even though there might be periods of silence – or if you simply want to monitor that channel.

Follow these steps to manually select a channel.

1.Repeatedly press SCAN/MAN until C7D appears.

2.Enter the channel number (1-200).

3.Press SCAN/MAN again.

%NGCTKPI"C"5VQTGF"%JCPPGN

If you no longer want a frequency stored in a channel (and you do not want to replace that frequency with a different one), follow these steps to clear the stored frequency.

1.Press SCAN/MAN to stop scanning.

2.Use the number keys to enter the channel number (1-200) you want to clear.

3.Press PGM. F=C appears.

4.Press 0 then ENT. The

frequency number changes to

&&&$&&&& to indicate the channel is cleared.

.KUVGPKPI"VQ"VJG" /CTKPG"$CPM

To listen to the marine bank, press MAR. C7h appears for about 2 seconds, then the scanner starts searching from marine channel 16.

30

Page 30
Image 30
Radio Shack PRO-82 manual NGCTKPIC5VQTGF%JCPPGN, Enter the channel number Press SCAN/MAN again