Radio Shack PRO-82 manual #4%*+06* 10617%*$#0-5, Searching the One Touch Banks

Your scanner automatically rounds the entered frequency down to the closest valid fre- quency. For example, if you enter a frequency of 151.473, your scanner accepts it as 151.470.

Press DELAY/´ if you want the scanner to pause 2 seconds on this channel before it proceeds to the next channel after a transmission ends (see “Delay” on Page 33). The scanner also stores this setting in the channel.

To program the next channel in sequence, press PGM and repeat Steps 2 and 3.

5'#4%*+0)"6*'" 10'"617%*"$#0-5

Your scanner contains groups of preset frequencies called One Touch Banks. Each one touch bank is associated with a specific activity (see “One Touch Banks” on Page 20). You can search for marine, fire/police, air, ham, and weather transmissions even if you do not know the specific frequen- cies that are used in your area. ±

The fire/police and ham one touch banks have separate groups of frequencies called sub-banks. This lets you search for and select only those frequencies that fall within a specific range within the fire/police and ham one-touch banks. ±

To listen to the marine bank, see “Listening to the Marine Bank” on

±"016'"±"

Storing Known

Frequencies Into

Channels

•If you entered a frequency that is already stored in another channel, the scanner beeps three times while displaying the lowest channel number where the

frequency is already stored, then #ZKFB- then the frequency you entered flash on the display. To store the frequen- cy anyway, press ENT again. Press TUNE/CLEAR to clear the frequency.

Searching the One Touch Banks

•You can use the scanner's delay feature while searching the banks (see “Delay” on Page 33).

•The fire/police one-touch bank contains low VHF, high VHF, and UHF sub-banks. The ham one- touch bank contains 10m, 6m, 2m, and 70cm sub-banks.

Searching the One Touch Banks

25