±"016'"±"
Turning On the
Scanner/Setting
Volume and
Squelch
•To listen to a weak or distant station, turn SQUELCH counterclockwise. If reception is poor, turn SQUELCH clockwise to cut out weak transmissions.
•If SQUELCH is adjusted so you always hear a hissing sound, the scanner will not scan or search properly.
Storing Known
Frequencies Into
Channels
•If you made a
mistake in Step 2, ;hheh appears and the scanner beeps three times when you press ENT. Simply start again from Step 2.
Operation
12'4#6+10
6WTPKPI"1P"VJG"5ECPPGT1 5GVVKPI"8QNWOG"CPF"
5SWGNEJ
1.Turn SQUELCH until the indicator points to MIN before you turn on the scanner.
2.To turn on the scanner, turn VOLUME clockwise until you hear a hissing sound.
3.Turn SQUELCH clockwise, just
until the hissing sound stops.
±
4.To turn off the scanner when you finish, turn VOLUME counterclockwise to OFF.
5VQTKPI"-PQYP" (TGSWGPEKGU"+PVQ"%JCPPGNU
Good references for active frequen- cies are the RadioShack Police Call Guide including Fire and Emer- gency Services, Official Aeronauti- cal Frequency Directory, and Mari- time Frequency Directory. We up- date these directories every year, so be sure to get a current copy.
1.Press PGM. F=C appears. Then enter the channel number
2.Use the number keys and DELAY/´ to enter the frequen- cy (including the decimal point) you want to store.
3.Press ENT to store the frequency into the channel. ±
24
