![](/images/new-backgrounds/1309932/30993229x1.webp)
To switch from the speakerphone to the handset, simply pick up the handset.
New Call Indicator
The NEW CALL indicator blinks if the system has either voice mail or a new call in call memory. The NEW CALL in- dicator stops blinking if you have re- viewed all the voice mail messages and new calls.
USING MUTE
During a call, press MUTE to talk to someone else in the room without the person on the other end of the line hear- ing your conversation. PRIVACY appears on the display.
Press MUTE again to resume your phone conversation.
Notes:
•If you do not have any special phone services, pressing FLASH might disconnect the current call.
•Pressing FLASH does not hang up the system.
•You can store a FLASH entry when you store a number in memory.
USING REDIAL
Note: The redial memory holds up to 24 digits, so you can redial long distance as well as local phone numbers.
To quickly redial the last number dialed, press SPEAKERPHONE or pick up the handset, press LINE 1 or LINE 2 to select a line, then press REDIAL when you hear a dial tone. The number scrolls across the display, and the phone dials it.
USING FLASH
FLASH performs the electronic equiva- lent of a switchhook operation for spe- cial services, such as Call Waiting.
For example, if you have Call Waiting, press FLASH to answer an incoming call without disconnecting the current call. F appears on the display to the right of the displayed numbers. Press FLASH again to return to the first call.
USING HOLD
To place a call on hold, press HOLD. The line’s indicator flashes slowly.
Note: Press the other line button without pressing HOLD to disconnect the current call on hold.
To release a call from hold, press that line’s button and begin speaking again. You can also release a call from hold by picking up any extension phone on that line.
15