OPERATION
MAKING AND RECEIVING CALLS
To make a call using the handset, pick it up. When you hear the dial tone, dial the number. Then current time disappears, and the number appears on the display as you dial it. When you complete the call, hang up the handset. The number disappears from the display, and the current time reappears.
When you receive a call, the system rings (if you set the RINGER switch to HIGH or LOW). To answer the call, pick up the handset.
Adjusting the Handset Volume
To adjust the handset volume before or during a call, set H/S VOLUME to LOW/ MED/HI for a comfortable listening level.
Using the Speakerphone
Follow these steps to make a call using the speakerphone.
1.Rotate VOLUME toward the narrow end of the arrow until it stops.
2.Press LINE 1 or LINE 2. The speak- erphone turns on and sounds a dial
14
tone. PLEASE DIAL and /,1(4 or /,1(5 appear on the display accord- ing to the line in use. The SPEAK- ERPHONE and LINE 1 or LINE 2 indicators light.
3.Adjust VOLUME to a comfortable lis- tening level.
4.Dial the number. The number ap- pears on the display as you dial it.
5.To end the call, press SPEAKER- PHONE. The SPEAKERPHONE in- dicator turns off. Then the current time reappears on the display.
Notes:
•When you use the speakerphone, you and the other caller cannot hear each other if you both speak at the same time.
•If the system is close to loud noises while you are using the speaker- phone, the system might not switch to let you hear the person on the other end of the line. If this happens, press MUTE to turn off the micro- phone so you can hear the caller (see “Using Mute” on Page 15). PRIVACY appears on the display.
To answer an incoming call using the speakerphone, press SPEAKERPHONE, LINE 1 or LINE 2.
To switch from the handset to the speakerphone, press SPEAKERPHONE. The SPEAKERPHONE and LINE 1 or LINE 2 indicators light. Then hang up the handset.
