RCA 25825 Without Power

sure the Network cords are not damaged.

• Make sure the hook switch pops up when the handset is lifted.

Try to Power reset the phone or IPBX and wait it returns to ID found.

You cannot be heard by the other party

• Make sure the handset or headset cord is inserted properly and securely.

• Make sure the MUTE feature is not turned on.

Phone does not ring

• Make sure the ringer is turned on.

• Make sure the Do Not Disturb feature is not activated.

• See solutions for “No dial tone.”

Incoming voice too low or none at all

• Check volume setting.

Memory dialing doesn’t work

• Did you program the memory location keys correctly?

• Did you follow proper dialing sequence?

Intercom does not function correctly

• Make sure all the stations connected to the digital router and each station shows it's ID.

• Make sure all phone extension’s (station numbers) involved have been assigned.

No PBX shows in the Base LCD display:

1. both 25801 & 25825 units work at the following IP address ra

Without Power

If the 25801 digital router becomes unplugged or there is a power outage, the router enters

into No Power Operation mode. In this mode, all of the 25825 phone stations will not be

functional, but you can plug any other standard corded phone into the by-pass port on the

25801 digital router. This will allow you to make and receive calls on line 1.

nge :

IP1: 172.28.xxx.xxx OR

IP2: 172.29.xxx.xxx OR

IP3: 172.16.xxx.xxx.

2. You can select IP address range by setting switch at the rear of 25801. Please unplug

the power of 25801 and all the 25825 units when you change the setting of IP switch.

(Default set at 172.28.xxx.xxx).

"NO PBX" after searching,

you can change/set the 25801 IP accordingly.

55

Contents

Main Equipment Approval Information Interference Information FCC RF Radiation Exposure Statement Licensing Hearing Aid Compatibility Page Page Introduction Parts Checklist Important Installation Information Page Page Connecting and setting up your RCA 25825 phone: Connect the handset cord: Check for a dial tone: Page Ringer Tone Priority Line unit will select the next available line. Set Language Phone Option Set Extension Number Set PBX ID Set Station Name Intercom Auto Answer No Unknown/Blocked Call Alert Tone Set Backlight Voicemail Choice Display Contrast Local Area Code Regional Area Codes Manually Setting the Time and Date Hour Format Restoring the Default Settings Record a New Greeting to Overwrite the Existing One Playback Name Programming the Voicemail Record Name Recording a Greeting Playback and Erasing a Greeting Set Voice Prompt MSG (Optional) Select the Greeting Pickup Delay Message Length Two-Way Recording T Memo Recording Voice Mail Functions Recording Incoming Messages Answer Call Types 5. Press 8 to forward this message to another user on the system; Message Playback I Key in your selection with the dialing pad to select the settings. Deleting Messages T Page Day Greeting Set Day Start Time Night/Weekend Greeting Set Night Start Time Set Weekend Day Auxiliary Greeting Auto Attendant Options General Delivery Mailbox Name Record Name Playback Name Greeting Playback Greeting Select Greeting Dial By Name Directory Dial by Name Extension Page Dial Zero for Operator Dial Zero Extension Extension Dialing Conference Room Page Room Extension Password Admin Password Set Hold Music (Optional) PBX Restore to Defaults Basic Operation Making Calls with the Handset Making Calls with the Speakerphone Making Calls with an Optional Headset Pre-dialing Answering Calls Page Releasing a Call from Hold Redial Reviewing the Redial Numbers Transferring a Call to Another Station Receiving a Transferred Call from Another Station Conference Calls To connect and conference: To disconnect one party: To disconnect both parties: Intercom Calls One-Touch Intercom Answering an Intercom Call Intercom Hold Intercom and External line Conference Calls Intercom 3-way Conference Calls Paging All Stations a. When you select the Page the handset menu, the unit will page the cordless handset only. Using the Conference Room Park (Optional) Caller ID Summary Screen the screen will show the incoming phone number of each call on each line. Saving a CID Record to the Memory Log or to Phone Book Memory Receiving and Storing CID Records Page Memory Log and Phone Book (Directory) Memory Storing a Number and Name in Memory Page Storing a Pause in Memory Dialing a Stored Number Memory Delete/Clear To Delete an Memory Log: Clear All Memories Auto Attendant Sequence for Callers Dial by name Page You cannot be heard by the other party Phone does not ring Incoming voice too low or none at all Memory dialing doesnt work Without Power General Product Care Service Warranty Limited Warranty Product Registration: Limitation of Warranty: How state law relates to this warranty: Page Visit the RCA web site at www.rca4business.com