Chapter 6: Additional Information
Troubleshooting
General Problems
Player won’t work (locks up)
•Try unplugging the AC power cord and plugging it back in.
•Reset the DVD recorder: on the front of the unit, press and hold the STANDBY/ON button while you press and hold the STOP
No power
•Plug in the DVD recorder. Make sure both ends of the AC power cord are securely plugged into the recorder and into an AC outlet.
•Make sure you’ve plugged it into a working outlet and/or a power strip that is turned on.
•Don’t plug the unit into an outlet that is operated by a wall switch.
No picture
•Turn on the TV.
•Tune your TV to the Video Input Channel that corresponds to the jacks you used to connect the TV to the DVD recorder (go to page 18 for more help).
•Check the PROG SCAN switch on the back of the unit to make sure it is in the OFF position. Try playing the disc again.
•Make sure your DVD recorder is connected properly.
•If you connected a satellite receiver or a cable box, make sure it is turned on.
•Press the ANTENNA button on the remote control.
A screen saver appears on the TV
•Your player is equipped with a screen saver that appears on the TV after your player has been idle for several minutes. To make it disappear, press STOP or CLEAR on the remote.
The menu is displayed in a foreign language
•The Language menu (Display menu) is set to that language. Go to the Setup menu and choose Languages (in Spanish, shown as Idiomas; in French, as Langues), choose the Display option. Highlight the language you prefer, and press OK.
I forgot my password
•Press the STOP button on the front of the unit while you press the STOP button on the remote
seconds (until the 
icon disappears from the front panel display). Release both buttons (the player should be unlocked). If that doesn’t work, try resetting the DVD recorder (instructions are listed below).
•Reset the DVD recorder: on the front of the unit, press and hold the STANDBY/ON button while you press and hold the STOP
The time (clock) is wrong
Go to the System Options menu and select AutoClock. Set it to off and then set the time manually via the Clock Setup menu, which is found in the Installation menu.
DVD Problems
Disc won’t eject
•When you put a disc into the player, the player may take up to 15 seconds to read the disc. You won’t be able to eject the disc during this time. Wait 15 seconds and try again.
•Maybe the Tray Lock feature has been activated. To unlock the disc tray, press and hold the STOP button on the front of the unit and then press and hold the OPEN/CLOSE button on the front of the unit at the same
Disc tray won’t open
•Maybe the Tray Lock feature has been activated. To unlock the disc tray, press and hold the STOP button on the front of the unit and then press and hold the OPEN/CLOSE button on the front of the unit at the same
Disc won’t play
•Many problems encountered when playing (or recording) a disc are related to the wide variation in disc quality due to the large number of brands and manufacturers. We highly recommend using discs from a reputable manufacturer. If you encounter problems with one brand, please try another brand.
•Insert a disc with the label side facing up.
•Check the type of disc you put into the player. This player only plays DVD video discs, Video CDs, audio CDs, and CDs with true mp3 files and/or JPEG files. mp3 files that have been converted to MPX files (or similar types of files) won’t be recognized by your DVD recorder.
•Both the DVD recorder and the disc are coded by region. If the regional codes don’t match, the disc cannot be played. This player is Region No. 1. Region coding isn’t applicable to discs you use to record (DVD+R and DVD+RW).
•Press STOP (the main menu appears). Check the PROG SCAN switch on the back of the unit to make sure it is in the OFF position. Try playing the disc again.
•If you’re playing a Multisession CD, you might not have closed the session before ejecting it from your computer. Close the session and try the disc again.
•If you’re trying to play a DVD+R or DVD+RW disc you recorded in this DVD recorder in another DVD player, the DVD player may not support DVD+R or DVD+RW discs. Also, if it is a DVD+R disc make sure you finalize it (page 43).
•If you’re trying to play a
•If it’s a DVD+R or DVD+RW disc, check the setting in the Parental Controls menu. Go to Unrated Titles, and see if the box is checked next to Apply to DVD+R and DVD+RW discs. If there is a check in the box and you set Unrated Titles to Password Required, simply highlight the checkbox and press OK. Try to play the
disc again.
50 | Graphics contained within this publication are for representation only. |
