RCA RC5227P user manual Connections & Setup, DVD Player + TV with Audio/Video Input Jacks, Go to

Connections & Setup

TV

	AUDIO	OUT
	R	L
			CABLE
			OR
			OFF-AIR
S-VIDEO	AUDIO	IN	SIGNAL
	VIDEO IN		ANT IN
	R	L

DVD

PLAYER

DVD Player + TV with Audio/Video Input Jacks

1.Connect the audio cables to the AUDIO OUT FRONT L (left - white) and R (right - red) jacks on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.

2.Connect the video cable.

•Basle video connection - Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD Player, and to the Video Input jack on your TV.

OR

•S-Video- (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV doesn't have S-Video, use the basic video connection listed above.

OR

•Component video (optional) - If your TV has component video (Y, Pn, and PR jacks) use

video-grade	cables for	the Y, PB, and PR connections.	Note that it is essential to match the
color-coded	connectors	with a compatible TV. If your	TV doesn't have component video,
use the basic video connection listed above.

3.Plug in the AC power cord into an AC outlet.

Note: Your cable or off-air connection to the television should not be affected by this connection. Connect your cable or off-air antenna to your television as you normally would. You may need to consult your television manual for details.

Go to page 21

Chapter 1 9