Regency L234-NG, L234-LP installation manual Completed Faceplate Installation

INSTALLATION

13)Tuck the wires completely into the sleeve and place the supplied 17) Fit the bottom louver into the slots at the bottom of the firebox as

cable tie to the end of it as shown in diagram 11. shown in diagram 14.

INSTALLATION

Diagram 11

14)Place the grommet removed from step 10 over the sleeve (see diagram 12) and put back in place (see diagram 13).

NOTE: Ensure connectors are tucked in behind the mounting bracket to allow the side faceplate panel to close easily.

Diagram 12

Diagram 13

15)Re-install the remote receiver bracket (reverse step 10).

16)Close the left side faceplate panel.

Diagram 14

Completed Faceplate Installation:

Contemporary Faceplate

Contour Faceplate

Regency® L234 Direct Vent Gas Insert 19