Regency L234-NG, L234-LP installation manual Log Set Installation, 2-711 2-713, 2-714, 2-712

INSTALLATION

LOG SET INSTALLATION

Read the instructions below carefully and refer to the images. Dangerous operating conditions may occur if the logs are not positioned in their correct locations. If the logs are broken do not use the unit until they are replaced. Broken logs can interfere with the pilot operation.

Log kit (Part # 536-930) contains the following pieces:

a)	2-711	Rear Log
b)	2-712	Center Log
c)	2-713	Left Log
d)	2-714	Front Log
e)	2-715	Top Left Log
f)	2-716	Top Right Log
g)		Embers (supplied with packaged manual)

h)946-669 Platinum Embers (supplied with packaged manual)

2-711

2-713

2-7152-716

2-712

2-714

1)Carefully remove the logs from the box and unwrap them. The logs are fragile, handle with care - do not force into position.

2)Fit log 2-711 into the pins on the rear log tray.

2-711

3)Place log 2-714 on the base of the firebox in front of the burner.

2-714

4)Fit log 2-712 into the pins on the middle of the burner.

INSTALLATION

2-712

2-711

Regency® L234 Direct Vent Gas Insert 23