MAINTENANCE
FAN REPLACEMENT
1)Unplug the power source.
2)Open the left and right side faceplate panels.
3)Remove the bottom louver by pulling out.
4)Remove the glass door.
a)Pull off the left side spring hook that holds the door in place. While holding the hook turn it upside down and place it into the middle opening on the top side mounting bracket. Repeat for right side.
Spring Hook
MAINTENANCE
b)Swing the door out 45 degrees and lift up and out.
5)Remove the logs.
6)Remove brick panels, if installed.
7)Remove the burner by undoing the 3 screws.
8)Remove the burner tray by undoing the 4 screws.
Burner Tray Removed
9)Remove the rear log tray by undoing the 3 screws.
Burner Removed
Top Mounting Bracket
Rear Log Tray Removed
32 | Regency® L234 Direct Vent Gas Insert |
