Remington Power Tools M15012US Replacement Chains, Storage, Replacement Parts and Accessories

REPLACEMENT CHAINS

Replacement saw chains may be available at your local hardware or home improvement store. The following list gives the specifications for replacement chains.

All chains will be .050 gauge, 3/8 pitch. 10" chains have 42 drive links 12" chains have 48 drive links 14" chains have 52 drive links 16" chains have 58 drive links

You may also order the replacement saw chains from the "Online Outlet" at www.remington- powertools.com using the part number listed in the illustrated parts list on pages 72-73 of this manual.

STORAGE

If storing saw for more than 30 days, follow steps below.

1.Drain oil tank after each use.

2.Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mix- ture.

3.Dry guide bar and chain.

4.Place chain in container filled with oil. This will prevent rust.

5.Wipe a thin coating of oil over surface of guide bar.

6.Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mixture.

7.Store chain saw

•in a high or locked place, out of children’s reach

•in a dry place

REPLACEMENT PARTS AND ACCESSORIES

WARNING: Use only replacement parts and accessories described in this manual. Use of other parts or ac- cessories could damage saw or injure operator.

For original replacement parts and accessories, contact your nearest Authorized Dealer or Au- thorized Service Center for this product. If they can not supply the part or accessory, contact your nearest Parts Central listed on page 74. Each Au- thorized Dealer, Authorized Service Center, and Parts Central is independently owned and oper- ated. You may also order parts from the "Online Outlet" at www.remingtonpowertools.com.

See pages 72 through 73 for an Illustrated Parts List.

If you need additional referral information, contact our Technical Service Department (see Technical Service).

In Canada call 1-800-561-3372 for parts and service information.

REPAIR SERVICE

Note: Only use original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

Each Authorized Service Center is independently owned and operated.

Warranty Service

If product requires warranty service, return it to nearest Authorized Service Center. You must show proof of purchase. If faulty materials or workmanship caused damage, we will repair or replace product without charge. Note: Normal wear, misuse, abuse, neglect, or accidental damage is not covered under warranty.

Non-Warranty Service

If product requires service, return it to nearest Authorized Service Center. Repairs will be billed to you at regular repair list prices.

For additional Service Center or warranty informa- tion, call 1-800-626-2237 or visit our Technical Service web site at www.remingtonpowertools. com.

www.remingtonpowertools.com 20