Remington Power Tools M30016AS Save these instructions, Unpacking, Important Safety Information

IMPORTANT SAFETY INFORMATION

•Do not let guide bar nose touch anything when chain is moving (see Figure 1).

•Never try cutting through two logs at same time. Only cut one log at a time.

•Do not bury guide bar nose or try plunge cut (boring into wood using guide bar nose).

•Watch for shifting of wood or other forces that may pinch chain.

•Use extreme caution when reentering a previous cut.

•Use low-kickback chain and guide bar sup- plied with this chain saw. Only replace these parts with chains and guide bars listed in this manual.

•Never use dull or loose chain. Keep chain sharp with proper tension.

Saw Maintenance and Kickback Safety

Follow maintenance instructions in this manual. Proper cleaning of saw and chain and guide bar maintenance can reduce chances of kickback. Inspect and maintain saw after each use. This will increase the service life of your saw. Note: Even with proper sharpening, risk of kickback can increase with each sharpening.

•Never carry chain saw by power cord.

•Never yank power cord to unplug it.

•Keep power cord from heat, oil, and sharp edges.

•Inspect extension cords often and replace if damaged.

4.When servicing, use only identical replace- ment parts.

5.When not in use, always store chain saw

•in a high or locked place, out of children’s reach

•in a dry place

UNPACKING

1.Remove all items from carton.

2.Check all items for any shipping damage. If you find any damage or if any parts are missing, call Technical Services at 1-800-626- 2237 for prompt service.

MAINTENANCE AND STORAGE

OF CHAIN SAW

1. Unplug chain saw from power source	Save these instructions.
• when not in use
• before moving from one place to another
• before servicing
• before changing accessories or attachments,
such as saw chain and guard
2. Inspect chain saw before and after each use.
Check saw closely if guard or other part
has been damaged. Check for any damage
that may affect operator safety or operation
of saw. Check for alignment or binding of
moving parts. Check for broken or damaged
parts. Do not use chain saw if damage affects
safety or operation. Have damage repaired by
authorized service center.
3. Maintain chain saw with care.
• Never expose saw to rain.
• Keep chain sharp, clean, and lubricated for
better and safer performance.
• Follow steps outlined in this manual to
sharpen chain.
• Keep handles dry, clean, and free of oil and
grease.
• Keep all screws and nuts tight.
• Inspect power cord often. If damaged, have
repaired by authorized service center.

www.remingtonpowertools.com 6